Raw Speakers

I am looking for a good source where I can purchase the following.
1. !2' Midrange Raw Speakers or A speaker cabinet with only 2 12" midrange speakers or ones that can be used for midrange.
2. Pro Sound Midrange Drivers and Horns.

are you building your own cabinet or what? Spill the beans my Houstonian!

BTW when are you going to come down to Beaumont! Lunch on me when you do.

are you building your own cabinet or what? Spill the beans my Houstonian!

BTW when are you going to come down to Beaumont! Lunch on me when you do.

I can build my own cabinets but if I get two already loaded with 2 12" Midranges I will be happy!
I don't know when i will be down Beaumont way! I have friends who live in Hampshire

Get out! All that is in Hampshire-Fannett is Rice farms. Small community, I bet somebody I know knows your peoples.

Um... I use either Elemental Design, or we use Parts Express... Although, Are you using this for pro audio... I really dont recommend it... Unless you are one of those crazy speaker box designers by day... Also, You have to know your electronics for the cross over...

Um... I use either Elemental Design, or we use Parts Express... Although, Are you using this for pro audio... I really dont recommend it... Unless you are one of those crazy speaker box designers by day... Also, You have to know your electronics for the cross over...

I do not need a passive crossover because I am using an electronic crossover. Again What I am using is the threeway crossover to three separate amps one for tweeters (In their own boxes), midrange (In their own boxes), Woofers (In their own boxes).
I do not have pics of the system but within a week I'll post some. here is my bass section.
2 JBL Bass Bins each loaded with 16ohms 15" woofer and connected in parallel via a jumper cable to equal 8ohms per side. In other words 4 bass bins altogether.

so you are basically going to create a tri-amped system?

so you are basically going to create a tri-amped system?

I already have one but I am refurbishing and upgrading it. Here is an old pic taken about 8 years ago. I had it stored in a warehouse. The picture is a bit grainy, taken with an older digital camera.
JBL loaded Bass on the bottom, EV midrange horn in the middle, EV tweeters and piezos on top.
I am going to eliminate the top tweeters and use the Midrange driver as tweeter section. I am now looking to add two 12" paper cone speakers as midrange section.